Effects of Immediate and Delayed Cementations for CAD/CAM Resin Block after Alumina Air Abrasion on Adhesion to Newly Developed Resin Cement.

CAD/CAM resin composite block long carbon chain micro tensile test self adhesive resin cement

Journal

Materials (Basel, Switzerland)
ISSN: 1996-1944
Titre abrégé: Materials (Basel)
Pays: Switzerland
ID NLM: 101555929

Informations de publication

Date de publication:
21 Nov 2021
Historique:
received: 25 10 2021
revised: 17 11 2021
accepted: 18 11 2021
entrez: 27 11 2021
pubmed: 28 11 2021
medline: 28 11 2021
Statut: epublish

Résumé

The purpose of this study was to evaluate the effect of one week of Computer-aided design/Computer-aided manufacturing (CAD/CAM) crown storage on the μTBS between resin cement and CAD/CAM resin composite blocks. The micro-tensile bond strength (μTBS) test groups were divided into 4 conditions. There are two types of CAD/CAM resin composite blocks, namely A block and P block (KATANA Avencia Block and KATANA Avencia P Block, Kuraray Noritake Dental, Tokyo, Japan) and two types of resin cements. Additionally, there are two curing methods (light cure and chemical cure) prior to the μTBS test-Immediate: cementation was performed immediately; Delay: cementation was conducted after one week of storage in air under laboratory conditions. The effect of Immediate and Delayed cementations were evaluated by a μTBS test, surface roughness measurements, light intensity measurements, water sorption measurements and Scanning electron microscope/Energy dispersive X-ray spectrometry (SEM/EDS) analysis. From the results of the μTBS test, we found that Delayed cementation showed significantly lower bond strength than that of Immediate cementation for both resin cements and both curing methods using A block. There was no significant difference between the two types of resin cements or two curing methods. Furthermore, water sorption of A block was significantly higher than that of P block. Within the limitations of this study, alumina air abrasion of CAD/CAM resin composite restorations should be performed immediately before bonding at the chairside to minimize the effect of humidity on bonding.

Identifiants

DOI: 10.3390/ma14227058 PMID: 34832458 PMC: PMC8620113
pubmed: 34832458
pii: ma14227058
doi: 10.3390/ma14227058
pmc: PMC8620113
pii:
doi:

Types de publication

Journal Article

Langues

eng

Subventions

Organisme : Japan Society for the Promotion of Science
ID : 20K09983

Références

J Adhes Dent. 2000 Winter;2(4):315-8
pubmed: 11317378
J Mech Behav Biomed Mater. 2019 Dec;100:103401
pubmed: 31445400
Oper Dent. 2020 Sep 1;45(5):484-495
pubmed: 32101496
Dent Mater. 2017 Mar;33(3):e124-e135
pubmed: 28057347
Int J Prosthodont. 2019 Sep/Oct;32(32):433-438
pubmed: 31486815
Mater Sci Eng C Mater Biol Appl. 2019 Aug;101:274-282
pubmed: 31029321
J Mech Behav Biomed Mater. 2021 Mar;115:104288
pubmed: 33383377
Dent Mater. 2020 Jul;36(7):914-926
pubmed: 32473833
J Adhes Dent. 2004 Autumn;6(3):233-8
pubmed: 15536854
J Biomed Mater Res B Appl Biomater. 2008 Apr;85(1):160-5
pubmed: 17806111
J Prosthet Dent. 2018 Aug;120(2):318.e1-318.e8
pubmed: 30097264
Jpn Dent Sci Rev. 2019 Nov;55(1):41-50
pubmed: 30733844
Dent Mater J. 2016;35(1):21-8
pubmed: 26830821
Dent Mater J. 2020 Sep 29;39(5):844-854
pubmed: 32448845
J Prosthet Dent. 2019 Nov;122(5):491.e1-491.e9
pubmed: 31623836
J Oral Sci. 2019;61(2):358-363
pubmed: 31217387
Dent Mater. 2012 May;28(5):529-34
pubmed: 22230107
J Prosthet Dent. 1994 Aug;72(2):189-93
pubmed: 7932267
J Dent. 2012 Jun;40(6):513-21
pubmed: 22410401
Dent Mater J. 2021 Mar 31;40(2):364-378
pubmed: 33100298
Dent Mater J. 1995 Jun;14(1):37-44
pubmed: 8940544
Dent Mater. 2016 Jan;32(1):1-10
pubmed: 26220776
J Am Dent Assoc. 2006 Sep;137 Suppl:14S-21S
pubmed: 16950933
Dent Mater. 2018 Jan;34(1):13-28
pubmed: 28969848
J Adhes Dent. 2018;20(5):425-433
pubmed: 30375582
J Dent. 2017 Apr;59:18-25
pubmed: 28174053
Dent Mater J. 2011;30(3):315-22
pubmed: 21597217
J Dent. 1996 Jan-Mar;24(1-2):129-35
pubmed: 8636484
J Prosthodont Res. 2018 Apr;62(2):177-183
pubmed: 28916464
Dent Mater. 2003 Nov;19(7):575-83
pubmed: 12901980
Dent Mater. 2016 Dec;32(12):1586-1599
pubmed: 27720423
Dent Mater J. 2019 Jun 1;38(3):354-360
pubmed: 30713288
Oper Dent. 1996 Nov-Dec;21(6):249-56
pubmed: 9227119

Auteurs

Akane Chin (A)

Cariology and Operative Dentistry, Graduate School of Medical and Dental Sciences, Tokyo Medical and Dental University (TMDU), 1-5-45 Yushima, Tokyo 113-8549, Japan.

Masaomi Ikeda (M)

Oral Prosthetic Engineering, Graduate School, Tokyo Medical and Dental University (TMDU), 1-5-45 Yushima, Tokyo 113-8549, Japan.
ORCID: 0000-0003-2214-4980

Tomohiro Takagaki (T)

Department of Operative Dentistry, Division of Oral Functional Science and Rehabilitation, School of Dentistry, Asahi University, 1851 Hozumi, Mizuho-City 501-0296, Japan.

Toru Nikaido (T)

Department of Operative Dentistry, Division of Oral Functional Science and Rehabilitation, School of Dentistry, Asahi University, 1851 Hozumi, Mizuho-City 501-0296, Japan.

Alireza Sadr (A)

Department of Restorative Dentistry, School of Dentistry, University of Washington, 1959 NE Pacific St., Seattle, WA 98195, USA.

Yasushi Shimada (Y)

Cariology and Operative Dentistry, Graduate School of Medical and Dental Sciences, Tokyo Medical and Dental University (TMDU), 1-5-45 Yushima, Tokyo 113-8549, Japan.
ORCID: 0000-0002-0751-4819

Junji Tagami (J)

Cariology and Operative Dentistry, Graduate School of Medical and Dental Sciences, Tokyo Medical and Dental University (TMDU), 1-5-45 Yushima, Tokyo 113-8549, Japan.

Classifications MeSH